About Facilities

About Facilities

Compression Facility


The compression facility uses a volume reduction machine of hydraulic compression type to make compressed baled products, each of which has a height of 1,000 mm, width of 1,000 mm, and a depth of 1,400 mm and weighs approximately 400 to 1,000 kg. Baled products are recycled as fuel use. Difficult-to-recycle ones are processed in-house for final disposal.


TypeCompression facility
Place2441-5 Shidenoki, Hatta, Iga-shi, Mie
Installation dateApril 5, 2010
Processing capacity1,224 m3/day
Processing typeVolume reduction machine of hydraulic compression type
Types of waste handledWaste plastics, waste paper, wood chips, scrap metal, and glass ceramic waste

(1) Input to compressor

Waste carried in is processed according to the purpose, such as recycling or final disposal. Therefore, each piece of waste is input separately.

(2) Compression volume reduction

Waste that is input is compressed for a volume reduction, lashed with wire vertically and horizontally, and discharged.

(3) Baled products

Baled products compressed with a volume reduction are shipped to their recycling destination according to the nature of the products. Difficult-to-recycle ones are processed for final disposal.

To top page

Information Disclosure

  • Ueno Eco Center
  • Waste Disposal Solutions
  • Recycling Efforts
  • Environmental Measures and Social Contribution Activities
  • Environmental Management System
  • Company Guide
  • Access Map